Single platform laser cutting machine
HN-3015C / HN-4015C/ HN-4020C/ HN-6025C
Middle thin plate cutting
0.4-24mmCarbon steel plate 0.4-14mmCarbon steel plate
0.4-12mmCarbon steel plate 0.4-10mmCarbon steel plate
The single platform laser cutting machine is suitable for 1000w-6000w laser cutting. The cutting thickness is related to the laser power.
Carbon steel plate：0.5-22mm
Stainless steel plate：0.5-12mm
Pipe welding bed
The internal structure of the lathe bed is welded by several rectangular tubes, and the reinforced rectangular tube is set inside the bed to increase the strength and tensile strength of the bed, increase the tensile strength and stability of the guide rail surface, and effectively avoid the deformation of the bed. The internal stress of the lathe bed can be completely released after aging treatment, and its internal stress can be almost ignored, so that the accuracy of the machine tool can be maintained for a long time
Integrated cast aluminum beam
Compared with the steel beam, the cast aluminum beam greatly reduces the weight, load of servo motor and inertia. At the same time, it can save the power cost, it has a very high running speed. The integrated cast aluminum beam has high precision, high speed and high efficiency. The light beam can ensure the rapid operation of the equipment, improve the processing efficiency and ensure the processing quality.
Independent electric control cabinet
Electrical equipment assembly, strong and weak electrical isolation, minimize circuit board interference. Yiding maintenance, good heat dissipation, dust, anti-static interference.
Independent cabinet type console:Style atmosphere, use Linghua, you can adjust the position of the console at will.
|Laser type||Fiber laser|
|Transmission system||Gantry double drive structure|
|Maximum moving speed||100m/min|
|Repeat positioning accuracy||±0.03mm/1000mm|